Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1579)

Brocade Network Advisor SAN User Manual 1527
53-1003154-01
Database tables and fields
H
SLOT_NUMBER The number of the physical slot in the chassis where
the blade is plugged in. For fixed blades, SlotNumber is
zero. smallint
TYPE ID of the blade to identify the type. smallint
EQUIPMENT_TYPE The type of the blade. It is either SW BLADE or CP
BLADE. varchar 32
STATE State of the blade, such as ENABLED or DISABLED. varchar 32
POWER_STATE State of power supply to the blade. varchar 16
ATTN_STATE varchar 32
SERIAL_NUMBER Factory serial number of the blade. varchar 32
PART_NUMBER The part number assigned by the organization
responsible for producing or manufacturing the blade. varchar 32
TRUNKING_SUPPORTED 1 = trunking is supported on this blade. smallint
FICON_DISABLED 1 = FICON is disabled on this blade. smallint
IP_ADDRESS IP address of first Ethernet management port for a
given slot with intelligent blade. char 64
SUBNET_MASK Mask of first Ethernet man.agement port for a given
slot with intelligent blade. varchar 64
DEFAULT_GATEWAY Gateway IP address Ethernet management for a given
slot with intelligent blade. varchar 64
PRIMARY_FW_VERSION Primary firmware version of applications on this blade.
Applicable only for AP_BLADE. varchar 48
SECONDARY_FW_VERSION Secondary firmware version applications on this blade.
Applicable only for AP_BLADE. varchar 48
FCIP_CIRCUIT_CAPABLE The blade is capable of creating FCIP Circuits.
•
1 = true.
•
0 = false.
•
Default value is 0.
smallint
FCIP_LICENSED FCIP Advanced Extension Licensing is available.
•
1 = available.
•
0 = not licensed.
•
-1 = not supported.
•
Default value is -1.
smallint
MAX_FCIP_TUNNELS The maximum number of tunnels that can be created
in this slot.
•
-1 = not supported.
•
Default value is -1.
int
MAX_FCIP_CIRCUITS Describes the maximum number of circuits that can be
created in this slot.
•
-1 = not supported.
•
Default value is -1.
int
CP_BLADE_INDEX CP blade index.
Default value is -1. smallint
TABLE 45 CARD (Continued)
Field Definition Format Size