Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1508)

1456 Brocade Network Advisor SAN User Manual
53-1003154-01
About user privileges
D
Firmware Management Allows you to download
firmware to selected
switches and manage the
firmware repository. Disables the Firmware
Management command
from the Configure menu
and right-click menu. Enables the Firmware
Management command
from the Configure menu
and right-click menu.
Disables all commands
and functions on the
dialog box except the
Close and Help. Enables the Firmware
Management command
from the Configure menu
and right-click menu.
Enables all commands
and functions on the
dialog box.
Host Adapter
Management Allows you to configure a
host. Disables the Element
Manager command on
the right-click menu and
the Element Manager >
HCM command on the
Configure menu. Disables the Element
Manager command on
the right-click menu and
the Element Manager >
HCM command on the
Configure menu. Enables the Element
Manager command on
the right-click menu and
the Element Manager >
HCM command on the
Configure menu.
L2 ACL Allows you to configure a
layer 2 access control list. Disables the Security >
L2 ACL command on the
Configure menu. Enables the Security > L2
ACL command on the
Configure menu.
Disables all functions on
the dialog box. Enables the Security > L2
ACL command on the
Configure menu.
Enables all functions on
the dialog box.
License Update Allows you to update your
license.
Allows you to control
access to the License
dialog box from the Help
menu. Disables the License
command on the Help
menu. Enables the License
command on the Help
menu; however, disables
the Update and OK
buttons. Enables the License
command on the Help
menu and enables you to
change the license key.
Performance Allows you to configure
the performance
subsystem, the display of
performance graphs, and
threshold settings. Disables entire
Performance submenu of
the Monitor menu as well
as the right-click
Performance Graph(s)
command on ports and
switch products.
Disables the Port Optics
command on the
right-click menu.
Disables the Performance
button in the DCB
Configuration dialog box. Enables entire
Performance submenu
off the Monitor menu as
well as the right-click
Performance Graph(s)
command on ports and
switch products.
Allows you to open the
Performance Setup dialog
box; however, disables
the OK button. No
changes can be made.
Allows you to open the
Performance Graphs
dialog box and enables all
controls; however,
disables the check boxes
under the Set Thresholds
label on the individual
port dialog box
(double-click a graph). Enables entire
Performance submenu of
the Monitor menu and the
right-click Performance
Graph(s) command on
ports and switch
products. Enables
changes to the
Performance Setup dialog
box.
Allows you to open the
Performance Graphs
dialog box and enables all
controls.
Enables all functions on
the individual port dialog
box (double-click a
graph).
Enables the Port Optics
command on the
right-click menu.
TABLE 132 Application privileges and behavior (Continued)
Privilege Description No Privilege Read-Only Read/Write