Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 547)

Brocade Network Advisor SAN User Manual 495
53-1003154-01
Configuration file management
12
Product Type The type of product.
Protocol The protocol for the port.
Serial # The serial number of the switch.
Speed Configured (Gbps) The actual speed of the port in Gigabits per second.
State The port state, for example, online or offline.
Status The operational status of the port.; for example, unknown or marginal.
Symbolic Name The symbolic name for the port.
Tag The tag number of the port
Vendor The hardware vendor’s name.
WWN The world wide name of the source switch to be replicated.
Zone Alias The zone alias.
Right and left arrow buttons Click to move the switches back and forth between the Available
Switches table and the Selected Switches table.
Selected Switches table Lists the switches selected as the destination switches.
Switch Name The name of the switch selected to be the destination switch.
IP The IP address of the switch selected to be the destination switch.
WWN The world wide name of the switch selected to be the destination switch.
Current Firmware The current firmware.
Status The status of the switch .
TABLE 44 Step 6. Validation
Field/Component Description
Validation Settings table The replication settings that have been configured in previous steps; for
example, the configuration type, source configuration, and destination
settings. Click Finish to approve the settings.
Disable Destination Switch check box Select to disable the destination switch during replication.
TABLE 45 Step 7. Summary
Field/Component Description
Summary table The replication settings that have been successfully applied to the
selected destination switches; for example, the configuration type,
source configuration, and destination settings. Click Close to close the
dialog box.
TABLE 43 Step 5. Destination Switches (Continued)
Field/Component Description