Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1701)

Brocade Network Advisor SAN User Manual 1649
53-1003154-01
Database tables and fields
H
UNIT_NEIGHBOR1 Stacking neighbor's unit(left) number for the
stackable devices. If there is no neighbor unit/non
stackable devices, then set to 0. num (2,0)
UNIT_NEIGHBOR2 Stacking neighbor's unit(left) number for the
stackable devices . If there is no neighbor unit/non
stackable devices, then set to 0. num (2,0)
UNIT_PRESENT Used to identify the stack unit is present in the
chassis or not. Present-1 and Not Present-2. num (1,0)
TABLE 279 PHYSICAL_INTERFACE
Field Definition Format Size
INTERFACE_ID Primary key for this table. int
PHYSICAL_PORT_ID Foreign key which refers PHYSICAL_PORT table. int
SPEED_IN_MB Interface speed in Mega Bytes. int
PHYSICAL_ADDRESS MAC address of this interface. varchar 64
LINK_ID Foreign key which refers LINK table. int
DUPLEX_MODE Interface duplex mode. Full/Half/Auto. smallint
IS_STACKING_INTERFACE This flag is to indicate whether the interface is
stacking interface or peri port. 0 indicates
non-stacking, 1-indicates stacking interface,
2-indicates peri port. num (1,0)
IS_PORT_PRESENT This flag is to indicate whether the port is presented
in the device.
0 = Unknown
1 = Present
2 = Not present int
PHYSICAL_DEVICE_ID For DCB switch, this is the core switch id.
For IP products, this is the physical_device_id in
physical_device table. int
UNIT_NUMBER This is the unit number of which the interface is
located for IP stacking products.
If it is not applicable, the value is -1. int
SLOT_NUMBER This is the slot number of which the interface is
located for the devices and switches.
If it is not applicable, the value is -1. int
PORT_NUMBER This is the port number of the interface. int
PORT_TYPE This column is used to store the port type of the
interface. The value will be populated by the
NosSwitchAssetCollector during the discovery of the
VCS switch.The value of 0 means its edge port, and 1
means its trill port. Default value is 0. smallint
UNIT_TYPE Indicates unit type in the stack. This column stores
the model type of a stackable unit such as
"ICX6610-48P". For non-stacking device it will be
empty varchar 64
TABLE 278 PHYSICAL_DEVICE (Continued)
Field Definition Format Size