Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 844
792
Brocade Network Advisor SAN User Manual
53-1003154-01
Creating a new encryption group
20
7. Enter the passphrase, which is required for restoring the master key. The passphrase can be
between eight and 40 characters, and any character is allowed.
8. Re-enter the passphrase for verification, then click Next.
The Select Security Settings dialog box displays. (Refer to
.)
FIGURE 347
Select Security Settings dialog box
9. Set quorum size and system card requirements.
The quorum size is the minimum number of cards necessary to enable the card holders to
perform the security sensitive operations listed above. The maximum quorum size is five cards.
The actual number of authentication cards registered is always more than the quorum size, so
if you set the quorum size to five, for example, you will need to register at least six cards in the
subsequent steps.
Setting quorum size to a value greater than zero and/or setting system cards to Required
launches additional wizard dialog boxes.
10. Click Next.
The Confirm Configuration dialog box displays. (Refer to
.) Confirm the encryption
group name and switch public key certificate file name you specified are correct, then click
Next.