Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 814)

762 Brocade Network Advisor SAN User Manual
53-1003154-01
Steps for connecting to a KMIP-compliant keyAuthority
20
8. Under Restore Backup, select Upload from browser, then enter a file name or browse to the file
location.
9. Enter the Backup Password in the field provided, then click Restore.
10. After the certificate is restored to the secondary node from the previously backed-up primary
node, select Maintenance > Services.
The Services Configuration page displays. (Refer to Figure 312 .)
NOTE
A message displays, advising that the secondary node requires a restart.
FIGURE 312 KeySecure Services Configuration page
11. Under Restart/Halt, select Restart, then click Commit and wait until the restart is completed.
The primary and second KeySecure nodes are now in a cluster and active for use.
Steps for connecting to a KMIP-compliant keyAuthority
If you are using a TEKA KMIP-compliant server, only Thales e-Security keyAuthority running version
4.0 is supported; however, before selecting KMIP as the key vault type, all nodes in an encryption
group must be running Fabric OS 7.2.0 or later.
For more information about configuration instructions, refer to Chapter 3 of the Fabric OS
Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP)
Key-Compliant Environments.