Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1304)

1252 Brocade Network Advisor SAN User Manual
53-1003154-01
Viewing a configuration policy manager report
31
- Matched Block — Name of the matched block.
- Status — Whether the configurations matched (Passed) or did not match (Failed).
- Failed Condition — Name of the failed condition.
- Match/Not Match — Whether the configurations matched (Match) or did not
match (Not Match).
- Condition Details — Details about the condition.
- Remediation — Details how to correct the failure, if the condition fails.
Host Checks — Switch checks provide the following information for each selected check:

Name — Product name.

Status — Result of the check and reason for failure if known. Valid results include
Passed, Partially Failed, Failed, Not Applicable, and Unknown.
Displays the Host name and status of the policy check for the following option:

Host — Check for at least Configured_Minimum_Value connections to attached fabrics

Host — Check for connections through two fabrics to each target LUN. This check
provides the following additional detail for this check:
- LUN Serial # — LUN serial number.
- Adaptor Port — Host adapter port number.
- Fabric — Fabric name.
- Storage Port — Storage port number.
5. Click the close button (X) on the Policy_Name - Configuration Policy Manager Report browser
window.
6. Click Close on the Configuration Policy Manager dialog box.
Exporting a configuration policy manager report
1. Click Export.
The File Download dialog box displays.
2. Click Save.
The Save dialog box displays.
3. Browse to the file location where you want to save the report and click Save.
4. Click the close button (X) on the Policy_Name - Configuration Policy Manager Report browser
window.