Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 446)

394 Brocade Network Advisor SAN User Manual
53-1003154-01
Showing a Call Home center
9
Showing a Call Home center
To show a Call Home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Click Show/Hide Centers (beneath the Call Home Centers list).
The Centers dialog box displays with a predefined list of Call Home centers ( Figure 169 ).
FIGURE 169 Centers dialog box
3. Select the check boxes of the Call Home centers you want to display.
Clear the check box to hide the Call Home center.
4. Click OK on the Centers dialog box.
The Call Home dialog box displays with the selected Call Home centers listed in the Call Home
Centers list.
Hiding a Call Home center
NOTE
Before you can hide a Call Home center, you must remove all assigned products.
To hide a Call Home center, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
The Call Home dialog box displays.
2. Click Show/Hide Centers (beneath the Call Home Centers list).
The Centers dialog box displays with a predefined list of Call Home centers.
3. Clear the check boxes of the Call Home centers you want to hide and click OK.
The Call Home dialog box displays with only the selected Call Home centers listed in the Call
Home Centers list.