Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 632)

580 Brocade Network Advisor SAN User Manual
53-1003154-01
Adapter software
15
FIGURE 222 Driver Repository dialog box
2. Click Import on the Driver Repository dialog box.
The Import Driver Repository dialog box displays.
3. Locate the driver file using one of the following methods:
• Search for the file you want from the Look In list.
• Enter the name of the image file you want to import in the File Name field.
4. Click Open.
After the import completes, you see a message that the driver imported successfully.
5. Click OK.
Deleting a driver file from the repository
1. Select one or more driver files from the Available Driver Files list on the Driver Repository
dialog box.
2. Click Delete.
The driver file is removed from the Driver Repository dialog box.
NOTE
Windows drivers (.exe files) cannot be imported into the server repository when the
Management application server is running on Linux or Solaris platforms.
Boot image repository
The boot code image stored in the adapter’s flash memory contains the instructions that enable
the server to locate the boot disk in SAN. The boot code image contains the basic input/output
system (BIOS), extensible firmware interface (EFI), and open firmware which enable the adapters to
be compatible with any system platform.