Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1517)

Brocade Network Advisor SAN User Manual 1465
53-1003154-01
About user privileges
D
SAN - High Integrity Fabric Allows you to set Fabric
Binding and Insistent
Domain IDs.
Disables the High
Integrity Fabric command
from the Configure menu. Enables the High Integrity
Fabric command from the
Configure menu.
Disables all commands
and functions on the
dialog box except the
Cancel and Help. Enables the High Integrity
Fabric command from the
Configure menu.
Disables all commands
and functions on the
dialog box.
SAN - Logical Switch
Configuration Allows you to create a
new logical switch, assign
and remove ports from a
logical switch, delete a
logical switch, configure a
logical fabric, and change
the fabric ID of a logical
switch.
You must be assigned to
the 'All Fabrics' resource
group to access Logical
Switch Configuration
feature. Disables the Logical
Switches command from
the Configure menu. Enables the Logical
Switches command from
the Configure menu.
Disables all functions
from the dialog box
except view.
Also requires access to All
Resources resource
group to access the
Logical Switches dialog
box. Enables the Logical
Switches command from
the Configure menu.
Enables all commands
and functions on the
dialog box.
Also requires access to All
Resources resource
group to access the
Logical Switches dialog
box.
SAN - Port Connectivity Allows you to view all of
the port details and
connected devices. Disables the Port
Connectivity command
from the Monitor menu
and right-click menu. Enables the Port
Connectivity command
from the Monitor menu
and right-click menu. Enables the Port
Connectivity command
from the Monitor menu
and right-click menu.
SAN - Port Mapping - Host Allows you to identify all
the HBAs that are in the
same server.
Disables the Host Port
Mapping command from
the Discover menu.
Disables the Server
right-click command on
HBAs. Enables Host Port
Mapping command from
the Discover menu and
right-click menu; however,
disables the Create,
Delete, and OK buttons. Enables Host Port
Mapping command from
the Discover menu and
right-click menu.
Enables all functions in
the Servers dialog box.
SAN - Port Mapping -
Storage Allows you to construct
multi-port storage
systems out of individual
storage ports. Disables the Storage Port
Mapping command from
Discover menu and
right-click menus for
Storage products and
ports in the tree and map. Enables the Storage Port
Mapping command from
Discover menu right-click
menus for Storage
products and ports in the
tree and map.
Allows you to open the
Storage Port Mapping
dialog box; however,
disables the Create,
Delete, right and left
arrow, and OK buttons. Enables the Storage Port
Mapping command from
Discover menu and
right-click menus for
Storage products and
ports in the tree and map.
Enables all functions on
the Storage Port Mapping
dialog box.
TABLE 133 SAN privileges and application behavior (Continued)
Privilege Description No Privilege Read-Only Read/Write