Document feedback – Brocade Network Advisor SAN User Manual v12.3.0 User Manual

Page 52

Advertising
background image

lii

Brocade Network Advisor SAN User Manual

53-1003154-01

Brocade 5000—On the switch ID pull-out tab located on the bottom of the port side of the
switch

Brocade 7600—On the bottom of the chassis

Brocade 48000—Inside the chassis next to the power supply bays

Brocade DCX and DCX-4S—On the bottom right on the port side of the chassis

4. World Wide Name (WWN)

Use the licenseIdShow command to display the WWN of the chassis.

If you cannot use the licenseIdShow command because the switch is inoperable, you can get
the WWN from the same place as the serial number, except for the Brocade DCX. For the
Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate at
the top of the nonport side of the chassis.

Document feedback

Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:

[email protected]

Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.

Advertising