Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1539)

Brocade Network Advisor SAN User Manual 1487
53-1003154-01
Viewing VC module properties
E
Viewing VC module properties
To view Virtual Connect (VC) module properties, complete the following steps.
1. Right-click a VC module and select Properties.
2. Review the properties for the device.
Unit Type The unit type of the node.
User Port # The number of the user port.
Vendor The product vendor.
# Virtual FCoE port count The number of virtual FCoE ports on the device. There is a one-to-one
mapping of TE ports to virtual FCoE ports. Therefore, the number of
virtual session ports is one for directly connected devices.
# Virtual Session Ports The number of virtual session ports associated with the GE port.
VLAN # The VLAN number of the FCIP tunnel.
VLAN Class of Service for Control
Connection The VLAN class of service for the control connection of the FCIP tunnel.
VLAN Class of Service for Data
Connection The VLAN class of service for the data connection of the FCIP tunnel.
VLAN ID The VLAN identification number.
WWN The world wide name of the device.
Add button Click to add a user-defined property. For more information, refer to
“Adding a property field” on page 1492.
Edit button Click to edit a user-defined property. For more information, refer to
“Editing a property field” on page 1493.
Delete button Click to delete a user-defined property. For more information, refer to
“Deleting a property field” on page 1493.
TABLE 140 Port properties (Continued)
Field Description
TABLE 141 Properties tab
Field Description
Fabric The name of the fabric.
Name (Fabric OS modules only) The name of the device.
WwnName The world wide name of the device.
IP Address (Fabric OS modules only) The IP address of the device.
Status The operational status.
Type The device type - Virtual Connect.
Port Count The number of ports.
Product Name The product name.