Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1583)

Brocade Network Advisor SAN User Manual 1531
53-1003154-01
Database tables and fields
H
DEVICE_PASSWORD varchar 256
DATE_TIME varchar 64
DEVICE_ENABLE_USERNA
ME varchar 256
DEVICE_ENABLE_PASSWOR
D varchar 256
CLI_FILTER varchar
HAS_PARAMETERS num (1,0)
PROMPT_ADDITIONAL_TAR
GET The flag to indicate whether or not to prompt for
additional targets during deployment.
1 = Prompt for additional targets.
0 =Do not prompt for additional target. smallint
PARAMETERS Stores Parameter name and values in XML Format. text
PARAMETER_MODE The flag to indicate whether the same parameter has
to be applied for all targets or different values to be
applied for each target. 0 - Same value for all targets.
1 - Different values for each targets. smallint
IS_EXAMPLE The flag to indicate whether or not if the template is
example template. 0 - User Defined (not example)
template. 1 - Example Template. smallint
VALIDATE_CLI_RESPONSE The flag to indicate whether or not if the CLI
responses for each of the CLI commands are to be
validated for this template. 0 - Dont validate CLI
Responses. 1 - Validate CLI Responses. smallint
PROMPT_ADDITIONAL_PAR
AMETERS The flag to indicate whether or not to prompt
Parameter tab during manual deployment for
changes. 0 - Dont prompt Parameter tab. 1 - Prompt
Parameter tab. smallint
SCHEDULE_ENABLED The flag to indicate whether or not the CLI Template
is scheduled. 0 - Scheduled deployment is turned
OFF. 1 - Scheduled Deployment is turned ON. smallint
MODULE Stores the module or feature name of the CLI
commands. This is used for example CLI templates. varchar 256
TABLE 54 CLIENT_VIEW
Field Definition Format Size
ID * Unique generated database identifier. int
USER_NAME The Management application user name. varchar 128
NAME Client view name. varchar 255
DESCRIPTION Client View description. varchar 255
TABLE 53 CLI_TEMPLATE (Continued)
Field Definition Format Size