Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 1383
Brocade Network Advisor SAN User Manual
1331
53-1003154-01
MAPS interoperability with other features
33
Launch Fabric Watch — A “None of the Fabric Watch specific operations can be performed on this
switch because the MAPS (Monitoring and Alerting Policy Suite) are enabled.” error message
displays.
•
Replicate Fabric Watch configuration — If you select a Fabric Watch configuration to replicate,
the Management application filters the MAPs-enabled switches from Source Configuration and
Destination Switches steps of the replicate configuration wizard.
•
Port Fencing — Only displays switches that do not have MAPs-enabled. Depending on your
discovered devices, displays one of the following error messages:
-
"None of the Fabric Watch specific operations can be performed on this fabric because the
MAPS (Monitoring and Alerting Policy Suite) is enabled on all the switches."
-
"Port Fencing cannot be configured on one or more switches in this fabric because MAPS
is enabled on them. Do you want to configure Port Fencing on the remaining switches?"
•
Frame Monitor — Only displays switches that do not have MAPs-enabled. A “None of the Fabric
Watch specific operations can be performed on this switch because the MAPS (Monitoring and
Alerting Policy Suite) are enabled.” error message displays.
•
Performance Thresholds — Only displays switches that do not have MAPs-enabled. A “None of
the Fabric Watch specific operations can be performed on this switch because the MAPS
(Monitoring and Alerting Policy Suite) are enabled.” error message displays.
•
Port Optics — Displays port optic details. For Fabric OS products running 7.2.0 or later, displays
combined status and allows threshold-based monitoring.
•
Call Home — Does not generate Fabric Watch events from MAPs-enabled switches. Therefore,
does not generate Call Home notification for existing Fabric Watch events. You must configure
the new MAPs Call Home event (MAPS-1021) to receive the Call Home message.
•
Fabric Watch dashboard support — The MAPS dashboard widgets display the number of MAPS
threshold violations for all network objects (such as ports, trunks, switches, and circuits) for all
MAPS-capable devices. In addition, the MAPS dashboard widgets include the Fabric Watch
threshold violations for devices with the Fabric Watch license or FC devices running Fabric OS
7.2.0 or later with the Fabric Vision license but not migrated to MAPS.
The Fabric Watch support only applies to the following widgets and dialog box:
•
Out of Range Violations widget (refer to
“Out of Range Violations widget”
•
Port Health Violations widget (refer to
“Port Health Violations widget”
•
Violations dialog box (refer to
details the supported RAS log event identifiers that display in the MAPS dashboard
widgets and the Violations dialog box.