Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 819)

Brocade Network Advisor SAN User Manual 767
53-1003154-01
Creating a new encryption group
20
7. Click Next.
The Select Key Vault. dialog box displays. (Refer to Figure 317 .)
FIGURE 317 Select Key Vault dialog box
Using this dialog box, you can select a key vault for the encryption group that contains the
selected switch. Prior to selecting your Key Vault Type, the selection is shown as None. The
dialog box contains the following information:
• Key Vault Type:
If an encryption group contains mixed firmware nodes, the Encryption Group Properties
Key Vault Type name is based on the firmware version of the Group Leader. Options are:
- NetApp Lifetime Key Manager (LKM): The NetApp Key Vault Type name is shown as
NetApp Lifetime Key Manager (LKM) for both NetApp Lifetime Key Manager (LKM) and
SafeNet KeySecure for key management (SSKM) Key Vault Types.
- RSA Data Protection Manager (DPM): If an encryption group contains mixed firmware
nodes, the Encryption Group Properties Key Vault Type name is based on the firmware
version of the Group Leader. For example, If a switch is running Fabric OS 7.1.0 or
later, the Key Vault Type is displayed as “RSA Data Protection Manager (DPM).”If a
switch is running a Fabric OS version prior to v7.1.0, Key Vault Type is displayed as
“RSA Key Manager (RKM)”.
- HP Secure Key Manager (SKM): The HP Key Vault Type name is shown as HP Secure
Key Manager (SKM) for both SKM and Enterprise Secure Key Management (ESKM)
Key Vault Types.