Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 900)

848 Brocade Network Advisor SAN User Manual
53-1003154-01
Master keys
20
FIGURE 399 Restore Master Key for Encryption Group dialog box - Restore from key vault
4. Choose the active or alternate master key for restoration, as appropriate.
5. Select Key Vault as the Restore From location.
6. Enter the key ID of the master key that was backed up to the key vault.
7. Enter the passphrase. The passphrase that was used to back up the master key must be used
to restore the master key.
8. Click OK.
Restoring a master key from a smart card set
A card reader must be attached to the SAN Management application PC to complete this
procedure.
Use the following procedure to restore the master key from a set of smart cards.
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box. (Refer to Figure 266 on page 694.)
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
3. Select Restore Master Key as the Master Key Action.
The Restore Master Key for Encryption Group dialog box displays. (Refer to Figure 400 .)