Customizing the events widget, Accessing additional data from the events widget, Host adapter inventory widget – Brocade Network Advisor SAN User Manual v12.3.0 User Manual
Page 337
Brocade Network Advisor SAN User Manual
285
53-1003154-01
Status widgets
7
The x-axis represents the number of occurrences of a particular event severity during the selected
time period. If you pause on a bar, a tooltip shows the number of events with that severity level
during the selected time period. Also, for each severity, the cumulative number of traps, application
events, and security events is reported next to the horizontal bar. If Syslog messages are included,
then they are included in the count. To conserve space, the number is shown as is or truncated to
the nearest 1,000 ("K") or 1,000,000 ("M").
By default, Syslog events are included in the summary; however, because Syslog events occur at a
much higher frequency than other events and therefore could skew the bars for the other events,
you can exclude Syslog events. If they are excluded, they will not be displayed in the legend. Users’
selections are persisted (per user per server).
Customizing the Events widget
You can customize the Events widget to display events for a specific network scope and time scope
to display Syslog details.
•
Include Syslog information (default) on the Event Summary pane by selecting the Show Syslog
check box. To exclude Syslog information, clear the Show Syslog check box.
•
To display data for a specific fabric or group, refer to
Accessing additional data from the Events widget
Double-click a bar in the Events widget to navigate to an event custom report (HTML) that displays
the events corresponding to the network scope and time scope selected.
For information about report details, refer to
Host Adapter Inventory widget
The Host Adapter Inventory widget (
) displays the host adapter products inventory as
stacked bar graphs.
FIGURE 121
Host Adapter Inventory widget
The Host Adapter Inventory widget includes the following data: