Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1367)

Brocade Network Advisor SAN User Manual 1315
53-1003154-01
Event custom report schedules
32
From the Schedules tab of the Event Custom Reports dialog box, you can perform the following
tasks:
• View — Displays the report data of the scheduled report definition. The View button is not
enabled for a report that is listed as Not Available.
• Add — Launches the Add Schedule dialog box.
• Edit — Launches the Edit Schedule dialog box with the selected schedule information
pre-populated.
• Duplicate — Creates a copy of the selected report schedule.
• Delete — Deletes the selected schedule from the Schedules list.
• Enable — Enables the selected schedule.
• Disable — Disables the selected schedule.
Adding or editing an event report schedule
The Add Schedule dialog box, shown in Figure 571 , allows you to select an existing report definition
and configure the parameters, such as the schedule’s format, frequency, recipients, and message
content, for when the report is run and to whom the report is sent.
To add or edit an event report schedule, complete the following steps.
1. Select Reports > Event Custom Reports.
The Event Custom Reports dialog box displays.
2. Click the Schedules tab.
3. Click the Add button.
The Add Schedule dialog box displays.
FIGURE 571 Add Schedule dialog box