Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1198)

1146 Brocade Network Advisor SAN User Manual
53-1003154-01
Flow Monitor
29
3. Select the Expand All check box to expand the Group/Product tree to show supported device
ports for all discovered devices.
4. Select a device port in the Available Device Ports list and click the right arrow to move to the
Selected Device Ports list.
Select the Use Any Port (*) option to use any supported device port. If you already selected a
device port, selecting this option clears the selection.
Note that moving a device port to the Selected Device Ports list automatically selects the Use
Selected Port option.
Move the device port back to the Available Device Ports list by clicking the left arrow.
5. Click OK on the Select Device Port dialog box.
The selected device port displays in the Source or Destination field.
Selecting an ingress or egress port from a list of available switch ports
To select the ingress or egress port for the switch, complete the following steps.
1. Click the ellipses button to the right of the Ingress or Egress field.
The Select Switch Port dialog box displays expanded to display all supported device ports for
the target switch in the Available Switch Ports list.
Unsupported ports do not display in the Available Switch Ports list.
2. Select the Expand All check box to expand the Group/Product tree to show supported switch
ports for all discovered devices.
3. Select a switch port in the Available Switch Ports list and click the right arrow to move to the
Selected Switch Ports list.
Move the switch port back to the Available Switch Ports list by clicking the left arrow.
4. Click OK on the Select Switch Port dialog box.
The selected switch port displays in the Ingress or Egress field. Note that the Target Switch
field updates dynamically based on the ingress port selection.