Fcip platforms and supported features – Brocade Network Advisor SAN User Manual v12.3.0 User Manual

Page 987

Advertising
background image

Brocade Network Advisor SAN User Manual

935

53-1003154-01

FCIP platforms and supported features

22

FCIP platforms and supported features

The following Fabric OS platforms that support FCIP:

The 8 Gbps Extension Switch.

The 8 Gbps Extension blade (8-slot Backbone Chassis, 4-slot Backbone Chassis).

NOTE

The 8 Gbps Extension blade is supported in 16 Gbps Backbone and Director Chassis,

IPv6 addressing is not supported in conjunction with IPsec on all platforms in Fabric OS version
v7.0, but will be supported in a later version.

Table 70

summarizes FCIP capabilities per platform.

TABLE 70

FCIP capabilities

Capabilities

8 Gbps Extension
Switch

8 Gbps Extension
blade

FCIP trunking

Yes

Yes

Adaptive Rate Limiting

Yes

Yes

10 GbE ports

No

Yes

FC ports up to 8 Gbps

Yes

Yes

Compression

Yes

Yes

Open Systems Tape
Pipelining (OSTP)
• FCIP Fastwrite
• Tape Acceleration

Yes

Yes

FICON extension

Yes

Yes

IPSec for tunnel traffic

Yes

Yes

Diffserv priorities

Yes

Yes

VLAN tagging

Yes

Yes

VEX_Ports

Yes

Yes

Support for third party WAN
optimization hardware

No

1

1.

Support is planned for a later release.

No

1

IPv6 addresses for FCIP
tunnels

2

2.

IPv6 addressing is not supported in conjunction with IPsec in Fabric
OS version v7.0, but will be supported in a later version.

Yes

Yes

Support for jumbo frames

No

1

MTU of 1500 is
maximum

No

1

MTU of 1500 is
maximum

Advertising