Yaskawa Matrix Converter - Manual (Page 23)

1
-4
Confirmations upon Delivery
‹ Checks
Check the following items as soon as you have received the MxC.
If you find any irregularities with the items listed above, contact the agency from which the MxC was pur-
chased, or your Yaskawa representative immediately.
‹ Nameplate Information
An information nameplate appears on the right side of each MxC. The nameplate shows the model number,
specifications, lot number, serial number, and other information on the MxC.
„ Example Nameplate
The following nameplate is an example of a standard MxC: 3-phase, 400 Vac, 11 kW, IEC IP00 design.
Fig 1.1 Nameplate
Table 1.2 Checks
Item Method
Has the correct model of MxC been deliv-
ered?
Check the model number on the nameplate attached to the side of the MxC.
Is the MxC damaged in any way?
Inspect the entire exterior of the MxC to see if there are any scratches or
other damage as a result of shipping.
Are any screws or other components
loose?
Use a screwdriver to make sure that all screws are properly fastened.
MxC model
Software version
Input specifications
Output specifications
Lot number
Serial number
MxC specifications
Weight
UL file number (+.'01 '
/1&'. %+/4#%#
+0276 #%2*8*\#
176276 #%2*8*\#M8#
52'% 
+2;#5-#9#'.'%64+%%14214#6+10 /#&'+0,#2#0
10 /#55 MI
24)
50