Removal – Yaskawa Matrix Converter User Manual
Page 362
Advertising
Maintenance and Inspection
8-
15
How to Remove or Install the Control-Circuit Terminal Board
The control-circuit terminal board can be removed and installed without disconnecting the cables.
Removal
1. Remove the digital operator and the front cover. The main cover does not need to be removed.
2. Remove the connectors and the lines connected to the FE and NC pins on the control-circuit terminal
board.
IMPORTANT
Always make sure that the charge indicator LED is completely out before removing or installing the control-
circuit terminal board.
Digital operator
Front cover
Terminal cover
Main cover
FE
NC
Terminal board for
control circuit
r2
s2 t2
p1 n1
R/L1 S/L2 T/L3 U/T1 V/T2 W/T3
(1)
Advertising