Yaskawa Matrix Converter - Manual (Page 366)

Standard MxC Specifications
9-
3
‹ Common Specifications
The following specifications apply to MxCs in both 200 V and 400 V classes.
Table 9.3 Common Specifications
Voltage Class (V) 200 400
Model: CIMR-ACAA† 25P5 2011 2022 2045 45P5 4011 4022 4045 4075 4110 4160
Maximum motor capacity (kW)
*1
5.5 11 22 45 5.5 11 22 45 75 110 160
Rated input current *2 A 26 47 91 174 14 26 49 92 157 228 287
Rated
output
Output capacity (kVA) 9 17 33 63 10 19 36 67 114 166 209
Rated output current
(A)
*3
27 49 96 183 15 27 52 97 165 240 302
Max output voltage Ratio of input voltage (Input voltage × 0.95)
Max output frequency Applicable for 120 Hz depending on parameter settings.
Power
Rated voltage and rated
frequency 3-phase: 200 V, 208 V, and 220
V, 50 Hz or 60 Hz
3-phase: 380 V, 400 V, 415 V, 440 V, 460 V, and 480 V,
50 Hz or 60 Hz
Allowable voltage
fluctuation
+10% to -15%
Allowable frequency
fluctuation
± 3%, fluctuation ratio: 1 Hz/100 ms or less
Allowable power
voltage imbalance
between phases
Within 2%
Input power factor 0.95 or more (When the rated load is applied.)
Control method
Sine wave pulse-width modulation (PWM)
Use parameter settings to select from three methods: Flux Vector Control, Open Loop Vec-
tor Control, or V/f Control.
Torque characteristics 150%/0 Hz with Flux Vector Control
*4
Speed control range 1:1000 with Flux Vector Control
*4
Speed control
accuracy
*5
± 0.2% with Open Loop Vector Control at -10°C to +40°C, *4
± 0.05% with Flux Vector Control at 25°C ± 10°C *4
Speed control response 30 Hz with Flux Vector Control *4
Torque limits For vector control only. Use parameter settings to change 4 quadrant control.
Torque accuracy
± 10% (Flux vector control: 25 °C ±10 °C with a vector motor,
carrier frequency of 4kHz)
*4
Frequency control range 0.01 Hz to 120 Hz
Frequency accuracy
(temperature
characteristics)
Digital references: ± 0.01% (-10 °C to +40 °C),
Analog references: ± 0.1% (25 °C ±10 °C)
Frequency setting
resolution Digital references: 0.01 Hz
Analog references: 0.03 Hz/ 60 Hz (11 bit signed)
Output frequency
resolution
0.001 Hz
Overload capacity and
maximum current
*6
150% of rated output current per one minute (for carrier frequency of 4 kHz).
Acceleration/
Deceleration time 0.00 s to 6000.0 s
Select from four combinations of independent acceleration and deceleration settings.
Braking torque Same overload capacity for motoring and regeneration
Control char
acter
istic
s