Bayer HealthCare Rapidlab 800 - Manual (Page 117)

2Ć19 Operating the System
CAUTION:ĄĂ To ensure the accuracy of the CO-ox measurement, close the
CO-ox cover before pressing Analyze.
3. Press Analyze .
4. When prompted, remove the aspiration adapter.
5. Type the required information in the Patient Information screen and then press
Done .
Refer to Entering Patient Sample Data, page 2-27, if you need more
information to complete this form.
Results appear on the screen and are continuously updated until analysis is
complete. The system then displays the final results and prints the report.
6. The system performs a wash at the end of analysis and then returns to the
Ready screen. If the system continues to display the Results screen after the
wash finishes, press
Home to return to the Ready screen.
If the system determines that there is insufficient sample for routine analysis, the
system prompts you to position the sample manually. Refer to Analyzing
Microsamples, page 2-11, if you require additional information to move the sample
manually.
To interrupt sample analysis at any time, press Cancel. The system stops analysis
and performs a wash. The Ready screen appears when the wash finishes.
!
Procedural
Notes