Bayer HealthCare Rapidlab 800 - Manual (Page 131)

2Ć33 Operating the System
Message Description
COox Cover Open During
Meas The cover on the CO-ox module was open while the
system was analyzing the sample.
COox Sample Chamber
Temp Error The CO-ox module sample chamber temperature is
±
0.35
°
C of range and cannot accept sample analysis
requests.
COox Sample Temp Out
of Range The CO-ox module sample chamber temperature is not in
range at the end of a measurement sequence.
Edited Report The Patient Information screen was edited after initial
completion.
Excessive Bubbles in COox
Sample The CO-ox module detects a non-continuous fluid in the
sample path.
D2 Excessive Drift: __ The sensor drift is beyond predefined limits during a
one-point or a two-point calibration.
Data Entry Incomplete
__ Not Sent Appears when required data entry fields were not
completed and Auto Send is turned on.
Insufficient COox Sample Appears when there is not enough sample to fill the
CO-ox module sample chamber and the analysis cannot
be performed.
Insufficient Sample Appears when there is not enough sample to fill the
measurement module and you manually positioned the
sample for measurement.
Interfering Substance
Detected Substances that interfere with analysis are present in the
sample. Only appears when 270 CO-ox is attached.
Interfering Substance: tHb The CO-ox module detects the presence of substances in
the sample that may interfere with the measurement.
Measurement Module
Temp Error The measurement module temperature is not in range and
the system cannot accept sample analysis requests.
Measurement Module
Temp Warning The measurement module temperature is
±
0.15
°
C of
range and can accept sample analysis requests.
__ Not Sent Appears when you press Do Not Send at the end of
analysis.
(Continued)