Bayer HealthCare Rapidlab 800 - Manual (Page 119)

2Ć21 Operating the System
6. When prompted, remove the sample device.
7. Type the required information in the Patient Information screen and then press
Done .
Refer to Entering Patient Sample Data, page 2-27, if you need more
information to complete this screen.
Results appear on the screen and are continuously updated until analysis is
complete. The system then displays the final results and prints the report.
8. The system performs a wash at the end of analysis and then returns to the
Ready screen. If the system continues to display the Results screen after the
wash finishes, press
Home to return to the Ready screen.
To interrupt sample analysis at any time, press Cancel. The system stops analysis
and performs a wash. The Ready screen appears when the wash finishes.
The Sample Source field on the Patient Information screen contains the words,
Expired Gas. You cannot change this field.
Procedural
Notes