Bayer HealthCare Rapidlab 800 - Manual (Page 413)

System Administration 5Ć3
Setting Up the System
This section describes the procedures for defining or changing 800 system setup
parameters. Table 5-1 describes many of the tasks that you can do in setup and lists
the setup menu option you select to perform each task.
Table 5Ć1.āăSetup Options
If you want to . . . Then select . . .
create and edit QC files Operating Setup and QC Setup
define the number of patient samples
stored on the system System Setup and System Options
select Auto ID and Auto Accept for
QC samples Operating Setup and QC Setup
define reference and action ranges Operating Setup and Patient Data
define the Patient Information screen Operating Setup and Patient Data
select fields to appear on the screen
and in the printed reports Operating Setup and Report Formats
select units of measure for parameter
results Operating Setup and Units/Defaults
select names for parameters Operating Setup and Parameter Names
define drift limits Operating Setup and Calibration Setup
select the calibration frequency Operating Setup and Calibration Setup
define the calibration gas values Operating Setup and Calibration Setup
select printing options Operating Setup and Printing Options
define correlation coefficients Operating Setup and Correlation
change the date and time System Setup and Date and Time
select the parameters to be analyzed System Setup and Parameters
select the panel the system uses to
analyze samples System Setup and Panels
(Continued)