Bayer HealthCare Rapidlab 800 - Manual (Page 134)

2Ć36 Rapidlab 800 Operator's Manual
To search . . . Then . . .
from the earliest date
to a specific date leave the Analysis Date From field blank, and type the
specified date in the Analysis Date To field.
from a specific date
to the present date type the start date in the Analysis Date From field, and type
nothing in the Analysis Date To field.
for a specific range
of dates type the start date in the Analysis Date From field, and type
the end date in the Analysis Date To field.
by shift or any other
specific time period type the start time in the Analysis Time From field, and
type the end time in the Analysis Time To field.
by sequence and
accession number type the sequence number in the first Sample Sequence
Number field.
3. Press Done .
If . . . Then . . .
more than one
sample is found the Patient Data Search Log screen appears, as shown in
Figure 2-20. The log contains the reports that the system
located for the search criteria specified. The most recent
report appears first.
Use the log to select reports you want to view, edit, print, or
transmit. You can also print the log.
one sample is found the Patient Data Search Result screen appears, as shown in
Figure 2-21.
Figure 2Ć20.ā Patient Data Search Log Screen
Press Reporting
Options to print or
transmit a report
selected from the log.
4. Select the report that you want to view and press Enter .
The Patient Data Search Result screen appears.