Bayer HealthCare Rapidlab 800 - Manual (Page 240)

3Ć68 Rapidlab 800 Operator's Manual
NOTE:ĄĂ Gently guide the paper against the left edge of the spool when you
wind paper on the spool. If the right edge of the paper roll is uneven, the paper
can jam.
Figure 3Ć39.āăInstalling the Printer Paper on the Spool
Paper Spool Key
Paper Advance Key
Turn the paper Spool
three or four
rotations.
Printer Cover
b. Insert the paper into the paper slot on the spool and turn the spool three or
four rotations away from you.
You can fold the end of the paper 1.3 cm (0.5 inch) and place it into the
slot. Press the paper advance key if there is not enough paper.
c. Lower the paper spool until it snaps into place.
9. Press Continue .
A wash sequence starts. When the wash finishes, a message box appears
prompting you to perform a two-point calibration.
10. Press No .
Press the paper advance key to remove the No Paper in Printer message from the
status area.
Procedural
Notes