Bayer HealthCare Rapidlab 800 - Manual (Page 424)

5Ć14 800 Series Operator's Manual
Parameter System Optional Units Default Units
ctHb g/dL g/L, mmol/L 840, 850, 860
pH pH H + nmol/L 840, 850, 860
O
2
SAT, F
I
O
2
, sO
2
,
Hct, Hb Fractions
% decimal fraction 840, 850, 860
Ca ++ mmol/L mg/dL 850, 860
Glucose mg/dL mmol/L 860
Lactate mmol/L mg/dL 860
1. Access the Units and Values screen from the Menu screen:
a. Select 5 Operating Setup and press Enter .
b. Select 4 Units/Values and press Enter .
The Units and Values screen appears, as shown in Figure 5-6.
Figure 5Ć6.ā Units and Values Screen for an 850
Press Next Screen to view
additional parameters.
2. Select the measurement units:
a. Move to the frame that contains the measurement unit you want to change.
b. Select the unit you want and press Enter .
c. Repeat steps a and b for each measurement unit you want to change.
d. Press Next Screen to view additional parameters.
e. Repeat steps a and b for each measurement unit you want to change.
3. Press Done .
4. You can define another setup function or press Exit Menu to return to the
Ready screen.
5
Menu Code
4