Creating new qc files – Bayer HealthCare Rapidlab 800 User Manual
Page 456
800 Series Operator's Manual
5Ć46
Creating New QC Files
Use this procedure when you first create a new QC file. The system uses QC files
to store results from QC sample analyses. You can use this QC information to
create reports summarizing QC results.
NOTE:
If you have an existing QC file and want to change to a new lot of QC
material, refer to Editing QC File Setup, page 5-49.
1.
Access the QC Files screen from the Menu screen:
a. Select
5 Operating Setup
and press
Enter
.
b. Select
1 QC Setup
and press
Enter
.
c. Select
1 QC Files
and press
Enter
.
2.
Select the file number you want to create and press
Enter
.
NOTE:ĄĂ
You cannot select File 13 as a QC file.
3.
Press
Done
.
The QC File Setup screen appears as shown in Figure 5-27.
Figure 5Ć27.ā QC File Setup Screen for an 860
This field displays the file
number that you selected.
4.
Complete the QC data form:
If you use . . .
Then . . .
the keypad
type the QC ID, level, lot number, and expiration date. Press
Enter
after you complete each field.
the optional bar
code scanner
scan the QC Catalog and QC Lot/Expiration bar codes from
QC Expected Values.
5.
Press
Done
when you finish.
A message appears prompting you to delete the current QC file setup data.
1
1
Menu Code
5