Bayer HealthCare Rapidlab 800 - Manual (Page 494)

800 Series Operator's Manual 5Ć84
3. Exit standby.
If you want to exit standby . . . Then . . .
automatically Do nothing. The system automatically exits
standby at the scheduled date and time.
manually Press Exit Standby or Home .
After the system exits standby, it performs the required calibrations and returns
to the Ready screen.
If you turn off the power while the system is in standby, the system returns to
standby when you turn on the power.
If the system is scheduled to perform an automatic calibration while in standby, the
calibration starts when the system exits standby. If multiple calibrations are
pending, the system performs a two-point calibration.
Procedural
Notes