Defining custom panels – Bayer HealthCare Rapidlab 800 User Manual
Page 419
System Administration
5Ć9
Defining Custom Panels
Use this procedure to customize a panel that the system will use to analyze a patient
sample. You can define up to 5 customized panels.
The system measures only the parameters listed in the panel. You can choose to
have a parameter not appear on the panel by turning the parameter off.
NOTE:
If you select a parameter to be off, the system does not measure or
calculate results during analysis, and the parameter name does not appear on the
Results screen or in the printed report. However, a parameter that is turned off is
evaluated during quality control testing.
1.
Access the Select Custom Panels screen from the Menu screen:
a. Select
6 System Setup
and press
Enter
.
b. Select
4 Panels
and press
Enter
.
c. Select
2 Custom Panel
and press Enter.
The Select Custom Panels screen appears, as shown in Figure 5-3.
Figure 5Ć3.ā Select Custom Panels Screen for an 850 System
Select the panel you
want and press Enter.
2.
Select one of panels to configure and press
Done
.
The Custom Panel screen appears. All parameters are selected.
3.
Move to the frame that contains the appropriate parameter. Press
Enter
to turn
the parameter on or off.
4.
Take the appropriate action.
If you . . .
Then press . . .
want to to save the custom
panel
Done
to return to the Ready screen.
do not want to save the
custom panel
Restore Defaults
to clear the screen. Press
Done
to
return to the Ready screen.
2
4
Menu Code
6