Bayer HealthCare Rapidlab 800 - Manual (Page 461)

System Administration 5Ć51
Figure 5Ć30.ā QC File Setup (Ranges) Screen for an 850
Press Clear Entry to
delete text in a field.
6. Perform one of the following options.
If you are . . . Then . . .
changing to a new QC
lot type the high and low target limits for each parameter.
Press
Enter after you complete each field.
NOTE: If you use the optional bar code scanner to enter
QC information, scan the QC Parameter bar codes.
editing a portion of the
existing QC file ranges move to the field requiring change, press Clear Entry
and type the new data. Press Enter after you complete
each field.
editing all of the
existing QC file ranges press the Erase All key to delete the target ranges for all
fields. A dialog box appears on the screen asking you to
confirm that you want to delete the target ranges in all
fields. Press
OK to clear all fields. Press Cancel to keep
the target ranges.
7. If a second screen of parameters exists, press Next Screen .