Lenze 8400 HighLine - Manual (Page 1073)

Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
1073
15 Parameter reference
15.2 Parameter list | C01231
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C01231
C01232
C01233
Parameter | Name:
C01231 | MCK: Manual jog speeds
Data type: INTEGER_32
Index: 23344
d
= 5B30
h
Manual jog speeds
 Manual jog
Setting range (min. value | unit | max. value)
-214748.3647 units/s 214748.3647
Subcodes Lenze setting Info
C01231/1 360.0000 units/s Manual jog: speed 1
• Regular manual speed
C01231/2 720.0000 units/s Manual jog: Speed 2
• Second manual speed (can be activated via MCK
control word)
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10000
Parameter | Name:
C01232 | MCK: Manual jog accelerations
Data type: INTEGER_32
Index: 23343
d
= 5B2F
h
Acceleration/deceleration for manual jog
 Manual jog
Setting range (min. value | unit | max. value)
-214748.3647 units/s2 214748.3647
Subcodes Lenze setting Info
C01232/1 720.0000 units/s2 Manual jog: Acceleration
• Acceleration for ramp-up to manual speed.
C01232/2 720.0000 units/s2 Manual jog: Deceleration
• Deceleration for manual speed ramp-down to
standstill.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10000
Parameter | Name:
C01233 | MCK: Manual jog S-ramp time
Data type: UNSIGNED_16
Index: 23342
d
= 5B2E
h
S-ramp time for manual jog
• Setting "0 s" ≡ no rounding
 Manual jog
Setting range (min. value | unit | max. value)
0.000 s 10.000
Subcodes Lenze setting Info
C01233/1 0.000 s Manual jog: S-ramp time
• S-ramp time for the manual speed ramps.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000