Lenze 8400 HighLine - Manual (Page 854)

15 Parameter reference
15.2 Parameter list | C00220
854
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00220
C00221
C00222
C00223
C00224
Parameter | Name:
C00220 | L_NSet_1: Acceleration time - add. setpoint
Data type: UNSIGNED_32
Index: 24355
d
= 5F23
h
The L_NSet_1 FB: Acceleration time for the additional setpoint nNAdd_a
Setting range (min. value | unit | max. value) Lenze setting
0.000 s 999.999 0.000 s
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000
Parameter | Name:
C00221 | L_NSet_1: Deceleration time - add. setpoint
Data type: UNSIGNED_32
Index: 24354
d
= 5F22
h
The L_NSet_1 FB: Deceleration time for the additional setpoint nNAdd_a
Setting range (min. value | unit | max. value) Lenze setting
0.000 s 999.999 0.000 s
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000
Parameter | Name:
C00222 | L_PCTRL_1: Vp
Data type: INTEGER_16
Index: 24353
d
= 5F21
h
The L_PCTRL_1 FB: Gain factor Vp for the PID process controller
Setting range (min. value | unit | max. value) Lenze setting
0.1 500.0 1.0
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10
Parameter | Name:
C00223 | L_PCTRL_1: Tn
Data type: UNSIGNED_16
Index: 24352
d
= 5F20
h
The L_PCTRL_1 FB: Reset time Tn for the PID process controller
Setting range (min. value | unit | max. value) Lenze setting
20 ms 6000 400 ms
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00224 | L_PCTRL_1: Kd
Data type: UNSIGNED_16
Index: 24351
d
= 5F1F
h
The L_PCTRL_1 FB: Derivative-action coefficient Kd for the PID process controller
Setting range (min. value | unit | max. value) Lenze setting
0.0 5.0 0.0
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 10