Lenze 8400 HighLine - Manual (Page 909)

Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
909
15 Parameter reference
15.2 Parameter list | C00507
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00507
Parameter | Name:
C00507 | Current password protection
Data type: UNSIGNED_16
Index: 24068
d
= 5E04
h
From version 06.00.00
Display of the currently active device access protection (password protection and device personalisation)
Note:
As the password protection can be configured individually for each single communication channel from version
15.00.00 bit 1 and bit 2 indicate the active protection always with regard to the communication channel used.
 Device access protection
Display area (min. hex value | max. hex value)
0x0000 0xFFFF
Value is bit-coded: Info
Bit 0 Only access to user menu 1 ≡The menus in the keypad are reduced. Only the user
menu can be used to change parameters.

Password protection
Bit 1 Parameter write protection 1 ≡ The currently used communication channel cannot
be used to write into write/read parameters.

Password protection
Bit 2 Parameter read protection 1 ≡ The currently used communication channel cannot
be used to read write/read parameters.

Password protection
Bit 3 Reserved
Bit 4 Reserved
Bit 5 Reserved
Bit 6 Reserved
Bit 7 Reserved
Bit 8 Reserved
Bit 9 Reserved
Bit 10 Reserved
Bit 11 Reserved
Bit 12 Reserved
Bit 13 Reserved
Bit 14 Reserved
Bit 15 Memory module binding on 1 ≡ Device personalisation is active. All write/read
actions between controller and memory module are only
executed if both components have the same binding ID.

Device personalisation
Subcodes Info
C00507/1 Password protection - all communication channels
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT