8basic drive functions (mck) – Lenze 8400 HighLine User Manual
Page 558
8
Basic drive functions (MCK)
8.6
Homing
558
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Mode 12: >_Lp
Procedure:
1. Movement in positive direction with start profile data set.
2. Positive edge of the travel range limit switch sets reference.
Positive travel range limit switch
Mode 12
>
Lp
Offset path
Sequence profile (optional)
Start speed
Profile speed
Lp
Inactive
Inactive
Inactive
Active
Ln
Inactive
Inactive
Active
Active
Note!
The load machine can also leave the travel range limit switch. There follows a return to
the home position that was set with the positive edge of the travel range limit switch.
• It is possible that, as a result, the machine will remain on an operated limit switch.
• It is therefore recommended that a home value offset be set in
in order to
release the operated limit switch.
1
0