1 ls_analoginput, 2 ls_analogoutput, 3 ls_canmanagement – Lenze 8400 HighLine User Manual
Page 1521: 4 ls_dataaccess, 5 ls_devicemonitor, 6 ls_digitalinput, 7 ls_digitaloutput, Ls_analoginput 1, Ls_analogoutput 1, Ls_canmanagement 1
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
1521
17
Function library
17.2
System blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
17.2.1
LS_AnalogInput
Interface to the analog input terminals.
17.2.2
LS_AnalogOutput
Interface to the analog output terminals.
17.2.3
LS_CANManagement
Control of internal functions of the CAN driver and display of the "Operational" status as well as the
node address.
17.2.4
LS_DataAccess
Only for Lenze-internal use.
17.2.5
LS_DeviceMonitor
Motor control status signals.
17.2.6
LS_DigitalInput
Interface to the digital input terminals.
17.2.7
LS_DigitalOutput
Interface to the digital output terminals.
For a detailed description see the main chapter "I/O terminals":
Internal interfaces | System block "LS_AnalogInput"
For a detailed description see the main chapter "I/O terminals":
Internal interfaces | System block "LS_AnalogInput"
For a detailed description see the main chapter "System bus CAN on board":
Internal interfaces | System block "LS_CANManagement"
For a detailed description see the main chapter "Motor control (MCTRL)":
Internal status signals | System block "LS_DeviceMonitor"
For a detailed description see the main chapter "I/O terminals":