Lenze 8400 HighLine - Manual (Page 894)

15 Parameter reference
15.2 Parameter list | C00453
894
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00453
C00455
C00456
C00458
C00459
C00460
Parameter | Name:
C00453 | Keypad: Default manual jog
Data type: UNSIGNED_32
Index: 24122
d
= 5E3A
h
From version 14.00.00
Setting range (min. value | unit | max. value)
0.000 16000.000
Subcodes Lenze setting Info
C00453/1 729.001 Keypad: Speed setpoint
C00453/2 56.002 Keypad: Display bar
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000
Parameter | Name:
C00455 | FB_call table
Data type: UNSIGNED_16
Index: 24120
d
= 5E38
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00456 | Editor level
Data type: UNSIGNED_8
Index: 24119
d
= 5E37
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00458 | SYS_call table
Data type: UNSIGNED_16
Index: 24117
d
= 5E35
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00459 | SYS_Output table
Data type: UNSIGNED_16
Index: 24116
d
= 5E34
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00460 | Remote: Local keyswitch
Data type: UNSIGNED_8
Index: 24115
d
= 5E33
h
This code is for device-internal use only and must not be written to by the user!