Lenze 8400 HighLine - Manual (Page 801)

Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
801
15 Parameter reference
15.2 Parameter list | C00006
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7 VFCplus: V/f linear + encoder This control type is used for speed control of an
asynchronous motor via a linear V/f characteristic.
• The control type requires a speed feedback via an
encoder mounted to the motor!
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f control
8 VFCplus: V/f quadr This control type is used for speed control of an
asynchronous motor via a square-law V/f characteristic.
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f characteristic control
9 VFCplus: V/f quadr + encoder This control type is used for speed control of an
asynchronous motor via a square-law V/f characteristic.
• The control type requires a speed feedback via an
encoder mounted to the motor!
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f control
10 VFCplus: V/f definable From version 04.00.00
This type of control is used for the speed control of an
asynchronous motor via a user-definable characteristic
with several interpolation points.
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
 V/f characteristic control
11 VFCplusEco: V/f energy-saving From version 10.00.00
This control type is used for energy-saving speed control
of an asynchronous motor via a linear V/f characteristic.
• For setting the V/f characteristic, only the rated
frequency ( C00089 ) and the rated voltage ( C00090 ) of
the motor have to be entered.
• Predestinated application areas of this control type
are materials handling technology and pump and fan
systems.
 V/f characteristic control, energy-saving
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00006 | Motor control
Data type: UNSIGNED_8
Index: 24569
d
= 5FF9
h