Lenze 8400 HighLine - Manual (Page 368)

7 Technology applications
368
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7 Technology applications
This chapter describes the handling and the functional range of the technology applications
available for the 8400 HighLine drive controller.
Related topics:
 Integrated technology applications ( 28)
 Commissioning of the "Actuating drive speed" technology application ( 57)
 Commissioning of the "Table positioning" technology application ( 65)
 Commissioning of the "Switch-off positioning" technology application ( 80)
Technology application "Actuating drive speed"
This technology application preset in
C00005 serves to solve speed-controlled drive
tasks, e.g. conveyor drives (interconnected), extruders, test benches, vibrators,
travelling drives, presses, machine tools, dosing systems.
 TA "Actuating drive speed" ( 370)
technology application "Actuating drive speed (AC Drive Profile)"
This technology application available
from version 13.00.00 provides a speed and
torque control by means of "AC Drive Profile". The fieldbuses EtherNet/IP™ and
system bus (CANopen) are supported.
 TA "actuating drive speed (AC Drive Profile)" ( 397)
Technology application "Table positioning"
This technology application serves to solve position-controlled drive tasks which are
normally controlled by a higher-level control via a fieldbus, e.g. transport facilities,
rotary tables, storage and retrieval units, feed drives, metering units, hoists.
Note: An external sequence control is required for this TA!
 TA "Table positioning" ( 430)
"Switch-off positioning" technology application
This technology application available
from version 04.00.00 is used to solve speed-
controlled drive tasks which require a pre-switch off or stopping at certain positions,
e.g. roller conveyors and conveying belts. The pre-switch off is implemented by
connecting switch-off sensors.
 TA "Switch-off positioning" ( 459)

Note!
Please note that the "StateLine", "HighLine" and "TopLine" device types differ with regard
to the number, functional range, and flexibility of the technology applications offered.