Lenze 8400 HighLine - Manual (Page 1393)

Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
1393
17 Function library
17.1 Function blocks
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
17.1.100 L_LimitPhi_2
This FB limits an angle signal to a value range whose upper and lower value range can be set via
parameters.
Inputs
Outputs
Parameter

Tip!
Always set the lower limit lower than the upper limit, otherwise value "0" is provided at the
dnOut_p output.
Identifier
Data type
Information/possible settings
dnIn_p
INT
Input signal
Identifier
Data type
Value/meaning
dnOut_p
INT
Output signal
Parameter Possible settings Info
C00631/3 -2147483647 Incr. 2147483647 Lower limit
• Lenze setting: -2147483647 incr.
C00631/4 -2147483647 Incr. 2147483647 Upper limit
• Lenze setting: 2147483647 incr.
/B/LPLW3KLB
GQ,QBS GQ2XWBS
&
&