Lenze 8400 HighLine - Manual (Page 90)

3 Commissioning
3.10 PC manual control
90
Lenze · 8400 HighLine · Referenzhandbuch · DMS 10.0 EN · 06/2014 · TD05/TD14
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PC manual control - operator dialog
On the left-hand side, the PC manual control operator dialog includes several tabs which serve to
select various control functions. On the right-hand side, setpoint and status displays are provided
for diagnostic purposes:
The different versions are described in the following chapters.

Note!
PC manual control can be exited any time by clicking the Close button.
If you exit PC manual control or change to another tab, the controller is inhibited via
device command ( C00002/16 ), i.e. the motor becomes torqueless and is coasting unless
it already is at standstill.