Siemens SINUMERIK 840C - Manual (Page 1095)

12 Functional Descriptions 07.97
12.32.8 Reduction zone of a protection zone
12.32.8 Reduction zone of a protection zone
Each coordinate of a protection zone that is assigned a motion axis has a reduction zone in
this coordinate. The reduction zone is the distance around the protection zone within which it
is only possible to traverse with a speed proportional to the distance from the protection zone.
The size of the reduction zone is equal to the maximum braking distance of the motion axis of
the coordinate.
X
Z
Max. braking distance in Z
Reduction zone of protection zone
Reduction zone
Max. braking distance in X
Protection zone
Machine part
For each motion axis for which a reduction factor of less than 100% results, this is displayed in
the axis-specific interface.
Formulas
Calculation of the max. braking distance of an axis
Max. velocity of the motion axis V
max
in m/s
Max. acceleration of the motion axis a
max
in m/s2
12–320 © Siemens AG 1992 All Rights Reserved 6FC5197- AA50
SINUMERIK 840C (IA)