Siemens SINUMERIK 840C - Manual (Page 630)

Display
File
functions
09.95

Siemens AG 2001 All Rights Reserved 6FC5197– j AA50 9–9
SINUMERIK 840C (IA)
Note With SW 4 and higher, the Contr.para FDD and Contr.para MSD softkeys have
been combined under the Contr.para drive softkey with one exception: Under
the circularity test function, the softkeys have remained as they were in SW 3.
You can call up the graphic display of measurement results with this softkey.
Fig. 9.3
You can enter the file function area by selecting this softkey.
Example for position
control loop
Fig. 9.4
9 Drive Servo Start-Up Application (as from SW 3)
9.1.2 Softkeys