Siemens SINUMERIK 840C - Manual (Page 150)

09.95

Siemens AG 2001 All Rights Reserved 6FC5197– j AA50 5–22
SINUMERIK 840C (IA)
5.4 Drive configuration and drive machine data (as from SW 3)
5.4.1 Drive configuration
Selection
Diagnosis
Machine
data
Start-up
Drive MD
Press the Diagnosis, Start-up, Machine data and Drive MD softkeys to display
the drive configuration display.
Note Press the info key for a short description of the drive configuration and drive ma-
chine data.
Copy/
insert
Fig. 5.7
Explanation The actual drive modules for the FDD and MSD motors are entered and activated
in this drive configuration display. The drive number is assigned the same num-
ber as the module slot and the modules are selected using the Select module
softkey. This configuration must then be backed up in the boot file with Accept
conf + NCKP0 softkey.
Note When selecting the module please ensure that the order no. taken from the
selection list and hardware coincide. Some order numbers are nearly identical.
For example, MSD module 45/60/76A:
1. Order no.: 6SN112x–1AA00–0GA0
2. Order no.: 6SN112x–1AA01–0GA0
5 Machine Data Dialog (MDD – as from SW 3)
5.4 Drive configuration and drive machine data (as from SW 3)
08.96