Siemens SINUMERIK 840C - Manual (Page 886)

06.93 12 Functional Descriptions
12.13.7 Actual value display
• The division counter display is shown in the following example (example for display
resolution 10 E - 3 mm).
99999.123 CC
The places after the decimal point are used to check
travel and to display a non-division position
The number of displayed decimal places after the point depends on the set display resolution.
The division counter includes the division offset (MD 1112*) in its calculations. The division
offset shows which actual value corresponds to indexing position 1 (offset=0: actual value=0
corresponds to indexing position 1).
Actual value No. Actual value identification Actual value division related
0 DRF offset ––––––––
1 PRESET offset X
2 –––––––– ––––––––
3 Actual offset (TO+ZO) ––––––––
4 Actual position X
5 Distance to go ––––––––
6 JOG offset ––––––––
7 Workpiece related actual value X
8 Simulation actual value ––––––––
9 Interpolation actual value ––––––––
10
Machine-related actual value with
following error
––––––––
© Siemens AG 1992 All Rights Reserved 6FC5197- AA50 12–111
SINUMERIK 840C (IA)