Siemens SINUMERIK 840C User Manual
Page 298
12.93
6 NC Machine Data (NC MD), NC Setting Data (NC SD)
6.6.1 General MD bits (general bits)
7
6
5
4
3
2
1
0
Bit No.
NC MD
5080
5081
5082
to
5089
Transformation channel number (3rd block)
G function for transformation selection (3rd block)
Axis name (3rd block)
See MD 5060
MD for 3rd TRANSFORMATION BLOCK.
7
6
5
4
3
2
1
0
Bit No.
NC MD
5090
to
5139
These NC MDs are intended for future expansion only and cannot be used at the
present time.
Default values
All bits 0 for
NC MD
5070, 5071, 5080, 5081, 5090, 5091,
5100, 5101, 5110, 5111, 5120, 5121, 5130, 5131
Default values
All bits 1 for
NC MD
5072-5079, 5082-5089, 5092-5099,
5102-5109, 5112-5119, 5122-5129, 5132-5139
These NC MDs must not be changed during the transformation option. They are verified on
Power On and alarm 3087 issued in the event of a verification error.
Active:
On POWER ON or on a warm restart
©
Siemens AG 1992 All Rights Reserved 6FC5197- AA50
6–113
SINUMERIK 840C (IA)