Metrohm tiamo 2.2 (ProcessLab) - Manual (Page 1001)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.2 (ProcessLab) ￭￭￭￭￭￭￭￭ 985
If the option not defined is selected as Device name, any device types or
device groups which are able to execute the command can be selected,
independently of the devices in the device table.
Selection Avantes Spectrometer
Default value Avantes Spectrometer
5.6.4.13.3 MEAS Spec - Measuring parameters
Tab: Method ▶ MEAS Spec ▶ Properties... ▶ Measuring parameters
Command name
Name of the command.
Input 25 characters
The parameters for the measuring procedure can be defined on this tab.
Start wavelength
Lower limit of the spectrum.
Range 200.0 ... 1100.0 nm
Default value 400.0 nm
End wavelength
Upper limit of the spectrum.
Range 200.0 ... 1100.0 nm
Default value 1000.0 nm
Integration time
Integration time for spectrum recording.
Range 0.01 ... 600000 ms
Default value 6 ms
Averaged spectra
The number of spectra that are recorded and averaged.
Range 1 ... 10000
Default value 10
Smoothing
Number of neighboring pixels with which the value for each measurement
pixel is determined.
Range 0 ... 100 Pixels
Default value 0 Pixels